Tarn-X®

Tarn-X is the original "wipe & rinse" tarnish remover specifically formulated for:

Download Material Safety Data Sheet

KEY BENEFITS:

• Removes tarnish quickly and easily — just "wipe and rinse".
• No rubbing and scrubbing.
• Lets you enjoy the beauty of your precious metals all year.
• Safe to use on your finest metals.

SIZES:

Tarn-X is sold in a 12 oz. black bottle. See our "Where to Buy" section for the retailer nearest you.

For industrial uses, Tarn-X can be purchased in 1 gallon, 5 gallon & 55 gallon containers. Please contact us for ordering information.

For more frequently asked questions or applications click here.

TIPS FOR USE:

• Do not use Tarn-X in a stainless steel sink.
• Do not use Tarn-X on silver knives with stainless steel blades.
• Do not use Tarn-X on stainless steel flatware.
• Tarn-X should not be left on an item longer than the recommended two minutes.
• ALWAYS test a small area before using Tarn-X.
• Do not use Tarn-X on poorly plated silver or silver that have scratched or marred surfaces.
• Prior to using Tarn-X, use a hot-soap-and water wash to remove any dirt or grime. Rinse with cold water and wipe dry before using Tarn-X.
• Immediately after using Tarn-X, rinse the item thoroughly with cold water and hand dry with a soft cloth.
• Clean spills immediately. Some laminated surfaces (counter tops) are coated with a synthetic material which may be affected by Tarn-X.
• When cleaning more than one item, thoroughly rinse each piece with cold water and towel dry before continuing to the next item.
• Make sure the item you are cleaning is in good condition.
• Only use Tarn-X on recommended metals (see product information).
• Do not mix gold and silver items together when cleaning with Tarn-X.
• Always use full strength.

Back to Top

DIRECTIONS FOR USE:

1. HOUSEHOLD GLOVES RECOMMENDED.
2. Dip cotton ball or soft cloth in TARN-X and wipe on tarnished areas. RINSE THOROUGHLY UNDER COLD WATER AND WIPE DRY. For large items, apply TARN-X to about 1/3 of article at a time, then rinse thoroughly. DO NOT SOAK ANY OBJECT IN TARN-X FOR OVER 2 MINUTES.
3. For heavily tarnished pieces, repeat above process until all tarnish is dissolved.
4. TARN-X only removes tarnish. Always apply Tarn-X Silver Glaze after using Tarn-X for optimum shine and luster.
   Always use full strength.

Back to Top

Where to Buy